Eastwood Hifi,
16 Q North Business Centre,
829 Old Northern Road,
Dural, NSW, 2158
Tel: (02) 9651 4922
© Eastwood Hifi 2015. Web design by Michael Vernon
Martin Logan Motion 30i Centre Speaker
Seen it cheaper?
If you have seen this
product advertised
cheaper elsewhere let us
know and we’ll do our
best to price match or
beat it!
Yamaha AVENTAGE - We are
official stockists of Yamaha’s
full Aventage line up of
premium AV products. We
offer expert advice on
Aventage and ancillary
equipment. We will try to
match any genuine advertised
price on Yamaha Aventage
Products (In Stock Items Only)
Product Details:
The Martin Logan Motion 30i Centre Speaker offers the following features.
Motion 30i Center Channel Speaker
Smaller multi-channel audio systems will benefit from the significant dynamic impact and detailed imaging revealed by a Folded
Motion® tweeter and dual, rear-vented 5.5-inch aluminum cone woofers, and a proprietary Vojtko crossover network. Motion
30i delivers the classic broad soundstage of the Motion Series from a newly designed enclosure enhanced by the slightest of
modifications, including the drive-stabilizing dust cap design and stiffened motor suspension. The speaker’s cabinet sports a
reinforced baffle and a fabric grille. Available in three stylish finishes: gloss black, matte white, and red walnut.
Engineering, Without Compromises
What makes the Motion Series sound so amazing? MartinLogan's dedicated in-house engineering and design team started by
utilizing and refining the most advanced, compact technologies and combining them with innovative engineering and
time-honored cabinet construction techniques. The result is an emotionally engaging sound that rivals (and most times
trounces) traditional loudspeakers of similar size and price. Our 'no compromise' philosophy gives Motion Series a unique
sound you won't find anywhere else.
Sound Inspired by Electrostatic Speakers
The success of the Motion Series is directly attributed to its close relation to MartinLogan’s legendary ultra-high-end
electrostatic loudspeakers. The desire to transmute that level of performance into a more traditional loudspeaker at a more
affordable price drove the initial design imperatives that created the Motion Series.
Proprietary Vojtko Crossover Networks
Premium Motion Series speakers feature proprietary Vojtko crossover networks using polypropylene and low-DF electrolytic
capacitors, custom-wound inductors, and thermal and current protection.
Vojtko crossovers are named after MartinLogan's chief audio technologist, Joe Vojtko. His unique approach to crossover design
is as big of a part of the "MartinLogan Sound" as are electrostatic and Folded Motion thin-film driver technologies. A Vojtko
crossover isn't so much a set of design requirements as it is a philosophy. Vojtko crossovers are designed in such a way that all
drivers are kept within their optimal frequency range and balanced with one another. The drivers themselves are as much a
part of a Vojtko crossover as are capacitors and resistors. Before the design of any crossover begins, drivers are carefully
selected or designed to operate within a very intentional frequency range and with precise and predictable performance
parameters. Vojtko crossovers are always built from high-quality parts, and care is taken to avoid overly complex topologies
—a straightforward objective due to the careful selection of woofers and tweeters. The final (and most critical) aspect of a
Vojtko Crossover is that final voicing is conducted in a space that is indicative of a real-world environment. This pragmatic
approach allows MartinLogan speakers to sound their best in real-world rooms.
SPECIFICATIONS:
Frequency Response: 65–25,000 Hz ±3dB
Recommended Amplifier Power: 20—200 watts per channel
Horizontal Dispersion: 80°
Vertical Dispersion: 80°
Sensitivity: 91 dB/2.83 volts/meter
Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers.
Crossover Frequency: 400 & 2,600 Hz
High Frequency Transducer:
1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
Low Frequency Transducer:
Two 5.5” (14cm) aluminum cone with cast polymer basket. Non-resonant asymmetrical chamber format. Rigid structured dust
cap to reduce cone break-up modes.
Components:
Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors
in parallel. Overall system thermal/current protection.
Inputs: Custom 5-way tool-less binding posts
Weight: 18 lbs. (8.2 kg)
Dimensions: 6.9" x 16.5" x 10.5 ", (17.5cm x 42cm x 26.6cm)
Specifications are subject to change without notice.
Price: $1,299.00
Please call for discounted
pricing and available
colours on 02 9651 4922.