Paradigm RVC-12SQ In Wall Subwoofer
Single
$1,599.00
The Paradigm RVC-12SQ is an in wall subwoofer with dual bass drivers. Bass frequencies are notorious for stirring up wall vibrations – not a good thing! Conventional in-wall subs excite these vibrations through a reactive force opposite to that created by the movement of the voice coil. We turned things around. In the RVC-12SQ the two woofers fire in phase, in opposite directions. This results in a physical cancelation of wall vibrations.
- Description
- Specifications
- Additional information
Description
Serious high-output subwoofers produce real energy. However, the majority of in-wall subwoofers out there don’t (read: CAN’T!) produce serious bass, so vibrational energy isn’t an issue. Not so with the RVC-12SQ in-wall subwoofer. Boasting dual state-of-the-art 14″ drivers in a cutting-edge Vibration Canceling Design Architecture, it’s free to dig deeper for new levels of articulate, soul-stirring bass while chasing new heights in performance.
We’re Stirring Up Good Vibrations
Paired with a matching Paradigm X amp and enhanced by the critically acclaimed Paradigm Perfect Bass Kit™ digital room correction system (sold separately), RVC-12SQ delivers bass that will rock your world, not your walls.
For new construction an optional BX-12SQ backbox is designed to maximize output by adding precision low-noise ports. In truth, with the use of this backbox, performance is even a notch better!
Dual State-of-the-Art Side-Mounted 4? (102 mm) x 14? (356 mm) Mineral-Filled Co-Polymer Polypropylene Cones. Highly damped and tremendously rigid cone provides tight, well-defined low-frequency response with a weight and authority that does justice to the most challenging music and movie material.
Pleated LCS™ Linear Corrugated Surround features Ultra-Long-Travel Suspension. The over-molded design produces truly exceptional peak-to-peak cone movement producing higher output and lower distortion—every bass note sounds distinct. Cone ribbing increases stiffness, reducing resonances to inaudible levels.
State-of-the-Art Motor Structure / FEA-Optimized 1/2-lb (0.19 kg) Super-Neodymium Magnets. 1? (25 mm) 6-layer voice-coil, anodized high-temperature aluminum former and dual Nomex® cloth spiders. The huge ceramic/ferrite magnets generate a truly enormous magnetic forcefield in the gap … always a plus in a subwoofer!
One-Piece High-Pressure Ultra-Rigid™ Die-Cast Chassis and Immovable MDF Medium Density Fiberboard Mounting System. State-of-the-art system! A superbly rigid structure that easily withstands every decibel of the enormous power generated by the two state-of-the-art 4? x 14? bass drivers! NOTE: A backbox is optional with this subwoofer.
Impedance Matching Switch. Allows use with X-300 or X-850 amplifiers.
- Design: Vibration-canceling in-wall, two high-excursion drivers, die-cast chassis with MDF mounting frame
- Low Frequency Driver: Two 356-mm (14 in) x 102-mm (4 in) mineral-filled co-polymer polypropylene cones
- Low Frequency Extension: 17 Hz (DIN)
- Finishes: White, paintable
- Weight: 14.3 lbs. (6.5 kg)
- Overall Dimensions: 17.75" (45.1cm) Height 13.75" (34.9cm) Width
- Cut-Out Dimensions: 16.4375" (41.8cm) Height 12.625" (32.1cm) Width
- Minimum Mounting Depth: 3.5" (8.9cm)
- Depth required is the distance between 1/2" drywall, or similar material.
- Minimum Internal Volume Required: 1.0 cu ft (28.4 L)
- Required Backbox: Sold Separately bx-12sq (optional)
Additional information
Weight | 7.5 kg |
---|---|
Dimensions | 55 × 45 × 15 cm |